Private on-device repair evidence

Bed Mesh Not Applied or First Layer Ignores Leveling

Confirm the mesh was saved, the correct profile is loaded after homing, start G-code does not clear it, and the Z axis visibly compensates during the first laye.

Not started0 of 8 stepsNot yet saved

Visual repair reference for bed mesh not applied or first layer ignores leveling — A small representative test no longer shows the original symptom.

First safe actionRun the first safe check and change one variable at a time.

Proof targetA small representative test no longer shows the original symptom.

Controlled tests logged0

Verification resultNot recorded

Machine and material context

Record the setup that produced this result

Printer Extruder Material Slicer Nozzle / layer

Saved only in this browser with the repair. Nothing is uploaded.

Optional visual proof

Add before and after photos for this report

Before repairChoose a photo After proof testChoose a photo

Photos stay in this open page only and are never stored or uploaded. They appear in the printed report while the page remains open.

One variable at a time

Controlled test history

No controlled tests have been logged yet. Return to Workshop Mode and record each change before running another test.

Repair sequence

Step completion

1
Confirm the correct build plate is installed and clean.Not completed
2
Run homing and mesh generation using the manufacturer workflow.Not completed
3
Save the mesh and restart the printer.Not completed
4
Inspect start G-code for commands that create, clear, or load a mesh.Not completed
5
Confirm the active mesh or slot on the printer screen or console.Not completed
6
Watch or feel for small Z corrections during a slow first-layer test.Not completed
7
Check gantry, bed mount, wheels, rails, and nozzle for play.Not completed
8
Create separate verified profiles for different plates if needed.Not completed

Private workshop notes

Observations and winning values

No notes recorded.

Verification test

Model: Small representative test print
Setup: Use the same printer, material, slicer and key settings as the failed model.
Pass: The original symptom is absent and the target feature is repeatable.
If unchanged: The symptom remains in the same location or stage.

Matched next step

Keep the useful workflow going.

Pair practical Hub guidance with Caffeine Monster and the clear three-product Character Collectibles Starter Pack.

View matched product See Character Collectibles Starter Pack Get useful updates Unlock complete tools

Bed Mesh Not Applied or First Layer Ignores Leveling

Verification test

Keep the winning setup and change only one variable in the next test.

Keep the useful workflow going.