Private on-device repair evidence

How to Fix Stringing in 3D Prints

Stop fine hairs, heavy webs, oozing, and travel strings by testing moisture, temperature, retraction, and travel behavior in the right order.

Not started0 of 7 stepsNot yet saved

First safe actionConfirm the filament is dry, then test temperature before large retraction changes.

Proof targetA travel test completes without hairs between towers.

Controlled tests logged0

Verification resultNot recorded

Machine and material context

Record the setup that produced this result

Printer Extruder Material Slicer Nozzle / layer

Saved only in this browser with the repair. Nothing is uploaded.

Optional visual proof

Before repairChoose a photo After proof testChoose a photo

Photos stay in this open page only and are never stored or uploaded. They appear in the printed report while the page remains open.

One variable at a time

No controlled tests have been logged yet. Return to Workshop Mode and record each change before running another test.

Repair sequence

1
Compare with a known-dry spool or dry the filament using the manufacturer’s instructions.Not completed
2
Print a temperature tower or small stringing test.Not completed
3
Lower temperature in 5°C steps while watching layer bonding and surface finish.Not completed
4
Return to the printer manufacturer’s retraction baseline.Not completed
5
Tune retraction distance in small increments, then tune speed.Not completed
6
Enable travel avoidance/combing only when it does not create excessive detours or surface scars.Not completed
7
If seams and corners also bulge, calibrate flow and pressure advance after basic stringing is controlled.Not completed

Private workshop notes

No notes recorded.

Model: Small representative test print
Setup: Use the same printer, material, slicer and key settings as the failed model.
Pass: The original symptom is absent and the target feature is repeatable.
If unchanged: The symptom remains in the same location or stage.

Matched next step

Continue the diagnosis, save the repair settings that worked, and explore the Characters & Creatures collection that includes Failed Print Gremlin.