Skip to main content
HUB.STLBEAST3D printing knowledge hubFix · learn · print
⌂
← Repair BenchWorkshop ModeFull guide
Private on-device repair evidence

Overhang Curling and Drooping

Fix upward-curled edges, rough overhangs, and nozzle collisions on unsupported geometry.

Not started0 of 7 stepsNot yet saved
Visual repair reference for overhang curling and drooping
A small representative test no longer shows the original symptom.
First safe actionRun the first safe check and change one variable at a time.
Proof targetA small representative test no longer shows the original symptom.
Controlled tests logged0
Verification resultNot recorded
Machine and material context

Record the setup that produced this result

Saved only in this browser with the repair. Nothing is uploaded.

Optional visual proof

Add before and after photos for this report

Photos stay in this open page only and are never stored or uploaded. They appear in the printed report while the page remains open.

One variable at a time

Controlled test history

No controlled tests have been logged yet. Return to Workshop Mode and record each change before running another test.
Repair sequence

Step completion

  1. 1
    Check part-cooling fan operation and duct alignment.Not completed
  2. 2
    Run an overhang test using the material profile.Not completed
  3. 3
    Lower temperature in small steps while checking bonding.Not completed
  4. 4
    Slow overhang speed and reduce overhang flow if the slicer supports it.Not completed
  5. 5
    Use a smaller layer height for finer support between layers.Not completed
  6. 6
    Reorient or add support for critical angles.Not completed
  7. 7
    Prevent warping so the nozzle does not collide with raised geometry.Not completed
Private workshop notes

Observations and winning values

No notes recorded.

Verification test

Model
Small overhang and support coupon
Setup
Use the final layer height, support interface and cooling profile.
Pass
Supports detach predictably and the underside is intact.
If unchanged
Supports fuse, collapse or leave severe scars.
Use the evidence, not guesswork

Keep the winning setup and change only one variable in the next test.

Return to Workshop Mode →
Caffeine Monster
Matched next step

Keep the useful workflow going.

Pair practical Hub guidance with Caffeine Monster and the clear three-product Character Collectibles Starter Pack.

View matched productSee Character Collectibles Starter PackGet useful updatesUnlock complete tools
STLBEAST ecosystemSolve the print on Hub. Discover the next project in the Store.