Find the same setting in a different slicer.
Slicers often use different labels for the same printing concept. Use this cross-reference as a navigation aid, then verify the exact behavior in your slicer version and printer documentation.
| Concept | Cura / Creality Print | OrcaSlicer | PrusaSlicer | Bambu Studio | SuperSlicer |
|---|---|---|---|---|---|
| Layer height | Layer Height | Layer height | Layer height | Layer height | Layer height |
| First layer height | Initial Layer Height | First layer height | First layer height | Initial layer height | First layer height |
| Extrusion multiplier / flow | Flow | Flow ratio | Extrusion multiplier | Flow ratio | Extrusion multiplier |
| Retraction distance | Retraction Distance | Length | Retraction length | Length | Retraction length |
| Retraction speed | Retraction Speed | Retraction speed | Retraction speed | Retraction speed | Retraction speed |
| Z hop | Z Hop When Retracted | Z hop when retracting | Lift Z | Z hop when retracting | Lift Z |
| Travel speed | Travel Speed | Travel speed | Travel | Travel speed | Travel |
| Pressure / linear advance | Linear Advance (firmware) | Pressure advance | Pressure advance / Linear advance | Pressure advance | Pressure advance |
| Outer wall speed | Outer Wall Speed | Outer wall | External perimeters | Outer wall | External perimeters |
| Inner wall speed | Inner Wall Speed | Inner wall | Perimeters | Inner wall | Perimeters |
| Top surface speed | Top/Bottom Speed | Top surface | Top solid infill | Top surface | Top solid infill |
| Bridge speed | Bridge Wall / Skin Speed | Bridge | Bridges | Bridge | Bridges |
| Bridge flow | Bridge Skin Flow | Bridge flow ratio | Bridges flow ratio | Bridge flow ratio | Bridges flow ratio |
| Support density | Support Density | Base pattern spacing / density | Pattern spacing | Support density | Pattern spacing |
| Support interface | Support Interface | Top interface layers | Interface layers | Top interface layers | Interface layers |
| Support Z gap | Support Z Distance | Top Z distance | Contact Z distance | Top Z distance | Contact Z distance |
| Seam position | Z Seam Alignment | Seam position | Seam position | Seam position | Seam position |
| Elephant-foot compensation | Initial Layer Horizontal Expansion | Elephant foot compensation | Elephant foot compensation | Elephant foot compensation | Elephant foot compensation |
| Minimum layer time | Minimum Layer Time | Slow printing down for better layer cooling | Slow down if layer print time is below | Slow printing down for better layer cooling | Slow down if layer print time is below |
| Max volumetric speed | Material Flow / experimental limits | Max volumetric speed | Max volumetric speed | Max volumetric speed | Max volumetric speed |
Names and locations can change between releases. Some features depend on firmware, printer capability or expert-mode visibility.
Translate the concept, not the number
A value that works in one slicer may not transfer directly when units, defaults, acceleration control or profile inheritance differ.
Check inheritance
Printer, filament, process and object-level overrides can each change the final toolpath.
Inspect the preview
Confirm walls, supports, seams, bridges, tool changes and travel moves before exporting the file.