STLBEAST Hub ยท Programmatic FAQ v97
What Causes Layer Separation?
Layer separation usually means poor layer adhesion caused by low temperature, too much cooling, wet filament, drafts, or printing too fast.
Fast answer
Layer separation usually means poor layer adhesion caused by low temperature, too much cooling, wet filament, drafts, or printing too fast.
1. Confirm the symptom
Look at the first failed area, the material, and the slicer profile before changing settings.
2. Fix the simple causes first
Check filament dryness, nozzle temperature, bed setup, belts, and the profile baseline.
3. Test one change at a time
Use a small calibration print so you can see which change actually improves the result.
Need a faster diagnosis?
Use STLBEAST Hub paths to move from quick answer to complete guide, AI Doctor support, and validated STLBEAST product workflows.
