Private on-device repair evidence
Resin Vat Leak: Containment and Recovery
Stop the printer, protect yourself, contain uncured resin, remove the vat without spreading the leak, inspect the film and screen protector, and replace damaged.
Not started0 of 8 stepsNot yet saved
Record the setup that produced this result
Saved only in this browser with the repair. Nothing is uploaded.
Add before and after photos for this report
Photos stay in this open page only and are never stored or uploaded. They appear in the printed report while the page remains open.
Controlled test history
No controlled tests have been logged yet. Return to Workshop Mode and record each change before running another test.
Step completion
- 1Stop the print and follow the printer emergency and resin-safety procedure.Not completed
- 2Wear appropriate gloves and eye protection and improve ventilation.Not completed
- 3Prevent UV exposure while containing uncured resin with compatible absorbent materials.Not completed
- 4Remove the vat carefully without allowing resin into openings.Not completed
- 5Filter salvageable resin only if uncontaminated and permitted by the manufacturer.Not completed
- 6Inspect the release film, frame, screws, vat body, screen protector, and surrounding seals.Not completed
- 7Replace damaged film or vat parts and clean the machine using approved methods.Not completed
- 8Do not power the printer if resin may have entered electronics; seek qualified service.Not completed
Observations and winning values
No notes recorded.
Verification test
- Model
- Small resin validation print
- Setup
- Use the final resin, temperature, exposure, lift and support profile.
- Pass
- The part completes with clean details, attached supports and no layer split.
- If unchanged
- The part detaches, splits, warps or loses detail.
Matched next step
Keep the useful workflow going.
Pair practical Hub guidance with Caffeine Monster and the clear three-product Character Collectibles Starter Pack.