Private on-device repair evidence

Support Scars and Rough Undersides

Improve surfaces above supports, reduce pitting, and protect visible detail.

Not started0 of 7 stepsNot yet saved

First safe actionRun the first safe check and change one variable at a time.

Proof targetA small representative test no longer shows the original symptom.

Controlled tests logged0

Verification resultNot recorded

Machine and material context

Record the setup that produced this result

Printer Extruder Material Slicer Nozzle / layer

Saved only in this browser with the repair. Nothing is uploaded.

Optional visual proof

Before repairChoose a photo After proof testChoose a photo

Photos stay in this open page only and are never stored or uploaded. They appear in the printed report while the page remains open.

One variable at a time

No controlled tests have been logged yet. Return to Workshop Mode and record each change before running another test.

Repair sequence

1
Rotate the model to protect the most visible surface.Not completed
2
Use painted/manual supports to limit contact to necessary areas.Not completed
3
Tune top Z distance with a small sample.Not completed
4
Use two or more interface layers at a sensible density when the slicer supports it.Not completed
5
Slow the first layer above support.Not completed
6
Tune cooling and bridge flow for the material.Not completed
7
Consider splitting and joining the model.Not completed

Private workshop notes

No notes recorded.

Matched next step

Pair practical Hub guidance with Caffeine Monster and the clear three-product Character Collectibles Starter Pack.