Private on-device repair evidence

Top Layer Gaps and Pillowing

Fix holes, infill showing through, weak top skins, rough ridges, and pillowed top surfaces.

Not started0 of 7 stepsNot yet saved

First safe actionRun the first safe check and change one variable at a time.

Proof targetA small representative test no longer shows the original symptom.

Controlled tests logged0

Verification resultNot recorded

Machine and material context

Record the setup that produced this result

Printer Extruder Material Slicer Nozzle / layer

Saved only in this browser with the repair. Nothing is uploaded.

Optional visual proof

Before repairChoose a photo After proof testChoose a photo

Photos stay in this open page only and are never stored or uploaded. They appear in the printed report while the page remains open.

One variable at a time

No controlled tests have been logged yet. Return to Workshop Mode and record each change before running another test.

Repair sequence

1
Confirm global extrusion is healthy.Not completed
2
Check slicer top thickness, not only number of layers.Not completed
3
Increase top thickness using a value appropriate to layer height.Not completed
4
Use a denser or more supportive infill pattern if spans are large.Not completed
5
Slow top-surface speed.Not completed
6
Tune cooling and temperature for the material.Not completed
7
Use monotonic/top-surface options only after structural coverage is correct.Not completed

Private workshop notes

No notes recorded.

Model: Small representative test print
Setup: Use the same printer, material, slicer and key settings as the failed model.
Pass: The original symptom is absent and the target feature is repeatable.
If unchanged: The symptom remains in the same location or stage.

Matched next step

Pair practical Hub guidance with Caffeine Monster and the clear three-product Character Collectibles Starter Pack.