Current, legacy and custom variants
- ELEGOO Mars/Saturn/Jupiter
- Anycubic Photon
- Phrozen Sonic
- Uniformation GK
- Creality Halot
- Formlabs
Use the custom-printer field in Printer Settings when an exact model is not listed.
Resin Printers
Troubleshooting and settings guidance for Resin Printers.
Start with the machine context
- Exposure calibration
- Build-plate adhesion
- Lift and release forces
- Supports, islands, hollowing and drain holes
Recommended knowledge
Guides matched to Resin Printers
Resin Printing
Resin Supports Failing or Detaching
A detailed STLBEAST repair guide to strengthen support strategy without scarring the model. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Moderate14 min
Resin PrintingResin Islands and Unsupported Pixels
A detailed STLBEAST repair guide to find every disconnected region before printing. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Moderate14 min
Resin PrintingResin Exposure Calibration
A detailed STLBEAST repair guide to find exposure that preserves detail while maintaining strength. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Moderate14 min
Resin PrintingResin Lift Speed and Distance Tuning
A detailed STLBEAST repair guide to reduce peel failures without making prints unnecessarily slow. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Moderate14 min
Resin PrintingResin Print Not Sticking to the Build Plate
A detailed STLBEAST repair guide to restore bottom-layer adhesion without excessive exposure. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Moderate14 min
Resin PrintingResin Layer Separation and Cracks
A detailed STLBEAST repair guide to restore layer bonding and reduce peel stress. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Moderate14 min
Resin PrintingResin Print Warping and Distortion
A detailed STLBEAST repair guide to control orientation, support, cure, and cross-section changes. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Moderate14 min
Resin PrintingResin Elephant Foot Compensation
A detailed STLBEAST repair guide to reduce overgrown bottom layers while preserving plate adhesion. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Moderate14 min
Resin PrintingResin Temperature and Cold-Weather Failures
A detailed STLBEAST repair guide to keep viscosity and cure response within the resin maker range. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Moderate14 min
Resin PrintingResin Printer LCD Screen Failure or Dead Pixels
Run the manufacturer exposure test with the vat removed, inspect the screen and cable, separate protector damage from LCD failure, and replace only with a compa.
Advanced17 min
Resin PrintingResin Build Plate Leveling and Zero Setup
Clean the plate and screen area, loosen the plate as specified, home against the approved leveling surface, square the plate, tighten evenly, and set zero only.
Intermediate15 min
First Layer3D Print Warping and Corner Lifting
Fix corners curling off the bed, base distortion, and large parts shrinking during printing.
Easy15 min