Lychee, Chitubox & Resin Slicers
Resin preparation workflows for orientation, hollowing, islands, supports and exposure.
Guides matched to Lychee, Chitubox & Resin Slicers
Resin Drain Holes and Suction Cups
A detailed STLBEAST repair guide to prevent trapped pressure and uncured resin in hollow models. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Resin Supports Failing or Detaching
A detailed STLBEAST repair guide to strengthen support strategy without scarring the model. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Resin Islands and Unsupported Pixels
A detailed STLBEAST repair guide to find every disconnected region before printing. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Resin Print Not Sticking to the Build Plate
A detailed STLBEAST repair guide to restore bottom-layer adhesion without excessive exposure. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Resin Layer Separation and Cracks
A detailed STLBEAST repair guide to restore layer bonding and reduce peel stress. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Resin Exposure Calibration
A detailed STLBEAST repair guide to find exposure that preserves detail while maintaining strength. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Resin Lift Speed and Distance Tuning
A detailed STLBEAST repair guide to reduce peel failures without making prints unnecessarily slow. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Resin Temperature and Cold-Weather Failures
A detailed STLBEAST repair guide to keep viscosity and cure response within the resin maker range. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Cloudy, Scratched, or Damaged Resin Release Film
Drain and filter the resin, clean the vat safely, inspect the release film under good light, and replace it when cloudy, deeply scratched, loose, creased, or pu.
Resin Build Plate Leveling and Zero Setup
Clean the plate and screen area, loosen the plate as specified, home against the approved leveling surface, square the plate, tighten evenly, and set zero only.
Supports Hard to Remove
Make supports detach cleanly without destroying the underside or welding to the model.
Tree Supports vs Normal Supports
A detailed STLBEAST repair guide to choose support geometry based on contact, stability, and cleanup. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.