PETG
Strong and practical, but sensitive to moisture, excessive squish and uncontrolled oozing.
Guides matched to PETG
PETG Stringing Fix
Reduce PETG webs, blobs, wisps, and nozzle buildup without making layers brittle or over-retracting the filament.
Wet Filament Symptoms and Drying
Identify moisture before changing slicer settings, then dry and store filament safely.
PETG Settings Guide
Tune PETG adhesion, stringing, temperature, cooling, flow, and supports for clean strong prints.
How to Fix Stringing in 3D Prints
Stop fine hairs, heavy webs, oozing, and travel strings by testing moisture, temperature, retraction, and travel behavior in the right order.
TPU Flexible Filament Settings Guide
Tune flexible filament speed, feed path, retraction, temperature, and support behavior.
Extruder Clicking or Grinding Filament
Fix skipped steps, clicking, chewed filament, weak extrusion, and feed interruptions.
Smooth PEI Adhesion Guide
A detailed STLBEAST repair guide to use smooth PEI safely with the right material and release strategy. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Textured PEI Adhesion Guide
A detailed STLBEAST repair guide to improve textured-plate grip without excessive squish. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Glass Bed Adhesion Troubleshooting
A detailed STLBEAST repair guide to balance cleanliness, temperature, and release on glass. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Brim vs Raft: Which Adhesion Aid to Use
A detailed STLBEAST repair guide to choose the least intrusive adhesion aid that solves the geometry problem. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Filament Will Not Load into the Extruder
A detailed STLBEAST repair guide to restore a clear and aligned filament path. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.
Filament Stuck in a Bowden Tube
A detailed STLBEAST repair guide to remove the obstruction without damaging fittings or the hotend. Learn how to recognize the symptom, rank the likely causes, apply safe fixes in order, verify the result, and prevent the failure from returning.